Previously StanzaListeners and Collectors where able to receive IQ of
type 'get' or 'set' (i.e., IQ requests) when no IQRequestHandler was
registered. By moving the 'return' statement one level down, even
listeners/collectors won't receive them.
I'm not sure why i've put the removeAsyncStanzaListener() call into
the finally block. If callback.processStanza(Stanza) takes a long
time (or even blocks), then it would appear to the "no response"
handling Runnable as if there was no response, when in fact there was
one.
Before this, if there was a stream error response by the server to our
stream open, that error response would only be handled in the reader
thread, and the user would get a message like:
"org.jivesoftware.smack.SmackException$NoResponseException: No
response received within reply timeout. Timeout was
5000ms (~5s). While waiting for SASL mechanisms stream feature from
server"
while the server may actually sent something like
<stream:stream
xmlns='jabber:client'
xmlns:stream='http://etherx.jabber.org/streams'
id='6785787028201586334'
from='jabbim.com'
version='1.0'
xml:lang='en'>
<stream:error>
<policy-violation xmlns='urn:ietf:params:xml:ns:xmpp-streams'>
</policy-violation>
<text xml:lang='en' xmlns='urn:ietf:params:xml:ns:xmpp-streams'>
Too many (2) failed authentications from this IP
address (1xx.66.xx.xxx). The address will be unblocked at 04:24:00
06.01.2017 UTC
</text>
</stream:error>
</stream:stream>
It was necessary to change saslFeatureReceived from SmackException to
XMPPException in order to return the StreamErrorException at this sync
point. But this change in return required the introduction of a
tlsHandled sync point for SmackException (which just acts as a wrapper
for the various exception types that could occurn when establishing
TLS). The tlsHandled sync point is marked successful even if no TLS
was established in case none was required and/or if not supported by
the server.
In previous Smack versions, it was possible to set the host's IP
address via setHost(String), this is no longer possible (since the
support for DNSSEC was introduced). The new
setHostAddress(InetAddress) allows it again to explicitly specifiy the
XMPP service's host IP.
It was a *very* bad idea to perform the SecurityMode.Required check in
the connection's reader thread and not at the end of
AbstractXMPPConnectin's connect(). :/
This behavior dates back to 8e750912a7
Fixes SMACK-739
instead of feature-not-implemented.
Changes to send service-unavailable for not handled iq as said in
RFC6120 § 8.4: https://tools.ietf.org/html/rfc6120#page-128
"""
o If an intended recipient receives an IQ stanza of type "get" or
"set" containing a child element qualified by a namespace it does
not understand, then the entity MUST return an IQ stanza of type
"error" with an error condition of <service-unavailable/>.
"""
if the connection is not connected in sendStanzaWithResponseCallback and
in PacketCollector.
Also decrease log level if roster result listener's exeption callback is
invoked with a NotConnectedException.
Add
- performSaslAnonymousAuthentication()
- performSaslExternalAuthentication(SSLContext)
- addEnabledSaslMechanism(String)
- addEnabledSaslMechanisms(Collection<String>)
to ConnectionConfiguration.Builder.
Instead of providing a special API call for anonymous authentication,
Smack now has a configuration builder method to set anonymous/external
authentication. This also removes a lot of duplicate code within
Smack.
Also move SASLAnonymous into o.j.smack.sasl.core.
Fixes SMACK-629.
instead of throwing XmlPullParserException, IOException and
SmackException.
Add a guard to AbstractXMPPConnection.processPacket() to always re-throw
RuntimeExceptions.
the combination with concurrencyLevel and LinkedBlockingQueue never
worked as intented. The idea was that the cachedExecutorService would
spawn new threads until maximumPoolSize (=concurrencyLevel) is reached,
and then start queing the Runnables.
But this was not the case, since ThreadPoolExecutor does not take into
consideration if the worker threads is busy, i.e. executing a Runnable,
or idle, i.e. waiting for a Runnable.
This means that if a busy Worker would execute a Runnable, which would
block, because it's waiting for an event (e.g. an incoming IQ
request), then the handling of those incoming IQ request would be
queued by ThreadPoolExecutor, because no fewer threads then corePoolSize
are running and the task can be queued (since the LinkedBlockingQueue is
unbounded).
Since e6045c6593 the cached executor
services maximum pool size is limited to concurrencyLevel (was
previously Integer.MAX_VALUE). In order to prevent
RejectExecutionException we need to use an queue which max size is
greater than 1 (i.e. nont an SynchronousQueue).
Connection closed with error java.util.concurrent.RejectedExecutionException: Task org.jivesoftware.smack.tcp.XMPPTCPConnection$2@41dce200 rejected from java.util.concurrent.ThreadPoolExecutor@41d59150[Running, pool size = 3, active threads = 3, queued tasks = 0, completed tasks = 4]
at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:2011)
at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:793)
at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:1339)
at org.jivesoftware.smack.AbstractXMPPConnection.asyncGo(AbstractXMPPConnection.java:1583)
at org.jivesoftware.smack.tcp.XMPPTCPConnection.processHandledCount(XMPPTCPConnection.java:1655)
at org.jivesoftware.smack.tcp.XMPPTCPConnection.access$2300(XMPPTCPConnection.java:137)
at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader.parsePackets(XMPPTCPConnection.java:1083)
at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader.access$200(XMPPTCPConnection.java:896)
at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader$1.run(XMPPTCPConnection.java:911)
at java.lang.Thread.run(Thread.java:841)
and remove getConnectionID().
Also make streamId a field of AbstractXMPPConnection. Most XMPP
connection types have a streamId, it appears to be optional when BOSH
is used though.
instead of just logging a warning if the XMPP domain has no DNS SRV
lookups, create the failedAddresses list now within DNSUtil and add the
information that the SRV lookup failed.
Also limit the max pool size of the remove callbacks service and use the
same keep alive time for idle threads as the cached executor service
uses.
Note that it would be possible to merge those two. But this could lead
to tasks from the cached executor service blocking the removal of
callbacks, which we don't want.
if connect() was not previously called. Previously calling login() with
arguments would not check for the preconditions.
The check to throw needs to be performed in AbstractXMPPConnection
before every 'abstract login(Non)Anonymously()' call. That's the two
lines that check the preconditions are duplicated.
Also fix NPE in
XMPPTCPConnection.throwNotConnectedExceptionIfAppropriate() when
packetWrite is null (i.e. if the connection was never connected before).
This is useful for cases where a result set is requested, as it's the
case in XEP-13 and XEP-313.
Also adds
XMPPConnection.createPacketCollector(PacketCollector.Configuration).
after at most 12 hours.
Also set a keep alive time for the removeCallbacksService to 30 seconds
and add AbstractXMPPConnection.schedule(Runnable, long, TimeUnit).
isAnonymous() is now a bit weakened since it also considers
allowNullorEmptyUsername.
SaslExternalMechanism of smack-sasl-provided now also doesn't throw an
UnsupportedOperationException.
Follow up on 7e4e3699a1
to ConnectionConfiguration.Builder().
And prepare SASL EXTERNAL for empty or null usernames.
Also clarify some parts regarding the user field.
Fixes SMACK-627
This also moves the logic to send error IQ replies from "when there is
no IQ provider registerd" to "when there is no IQ request handler
registered". Which has for example the advantage that IQ parsing no
longer asks for a connection instance.
It's important to know if the stream was resumed. authenticated() is the
ideal callback for Managers to reset their state (e.g. cached values of
the connection state). But if the stream was resumed, the cached values
don't have to be reset.
notably add a cache for the active and default privacy list to avoid
IQ get/response round-trips.
Also add a few methods to PrivacyListManager to get the privacy list
names. The already existing methods always returned the whole list
together with the name, which caused two round-trips.
Simplified some code.
Properly escape Privacy XML.
Differentiate between asynchronous and synchronous ones. Asynchronous
are the ones where the invocation order may not be the same as the order
in which the stanzas arrived.
Since it's no longer guaranteed that when a unit test calls
processPacket(stanza)
the stanza will be completely processed when the call returns, it was
necessary to extend the unit tests (mostly Roster and ChatManager) with
a packet listener that waits for his invocation. Since we now also use
LinkedHashMaps as Map for the packet listeners (SMACK-531, SMACK-424),
adding a packet listeners as last also means that it will be called as
last. We exploit this behavior change now in the unit tests.
Rename 'recvListeners' to 'syncRecvListeners' in AbstractXMPPConnection.
Rename 'rosterInitialized' to 'loaded' in Roster.
Add Roster.isLoaded().
Reset 'loaded' to false in
Roster.setOfflinePresencesAndResetLoaded() (was setOfflinePresences()).
Fixes SMACK-583, SMACK-532, SMACK-424
Introducing a clean split between the constant connection configuration
parameters, which are now all in ConnectionConfiguration and the dynamic
connection state (e.g. hostAddresses) which are now in
AbstractXMPPConnection.
Also removed all arguments of login() since the username, password,
resource and callback handler need now to be configured via
ConnectionConfiguration.
Also remove documentation/extensions/messageevents.md, as it's already
in documentation/legacy
Also make executorService a non-ScheduledExecutorService. This was an
artifact from times where executorService as used to schedule
Runnables. But now it's just used to queue the receive packets in
Runnables and call the packet collectors and listeners.
sendListeners are now invoked *after* the packet has been put on the
wire.
Also sending listener exceptions are not catched and not only
NotConnectedExceptions. And a exception does not cause a 'break' but a
'continue' now. Log level is WARNING now.
Using
createPacketCollector(filter);
sendPacket(packet);
was error prone, i.e. the PacketCollector could leak if sendPacket()
would throw an exception and the user forgot to call
PacketCollector.cancel(). For cases where
createPacketCollectorAndSend(IQ) is not sufficient (because we don't
send IQs), createPacketCollectorAndSend(PacketFilter, Packet) is now
used, which does take care that the PacketCollector does not leak if
sendPacket() throws an Exception.
both serve the same purpose: As callback for Packets. There is no need
to have both, so remace PacketInterceptor and let PacketListener take
its place. Some classes like ChatStateManager can now use
MessageListener as interceptor callback, which is more convenient.
Allows interceptor to remove themselves in the interceptPacket() method.
Same change for Interceptors as was done in
15d59299a2 for (send|recv)Listeners.
instead of rely on ListenerWrapper checking the PacketFilter *and*
invoking the PacketListener we now use two for-each loops, where the
first filters the PacketListeners that should get invoked and use the
second for-each loop to actually invoke the PacketListener.
Before, the code was not thread safe if a PacketListener would remove
itself from the (send|recv)Listeners.
Also make packet(Listener|Filter) in ListenerWrapper final.
this is the first stop towards fixing "SMACK-65: parsing should look for
depth", by providing the initial parsing depth to the provider. Some
methods (.e.g parseMessage) now use the depth as abort condition,
instead of a unclean String equals check.
parseIQ() and parseExtension() where both renamed to parse.
This also restricts the Exceptions thrown by the parse method, to just
XmlPullParserException, IOException and SmackException (not really a big
victory, but nevertheless a slight improvement).
StreamFeatureProvider is now gone, we simply use PacketExtensionProvider
for stream features.
- De-duplicate code by moving it into AbstractXMPPConnection
- Introduce TopLevelStreamElement as superclass for all XMPP stream elements.
- Add SynchronizationPoint, ParserUtils
- Add ParserUtils
Fixes SMACK-333 and SMACK-521
inverse boolean condition, correct is: "if packetListener has been
removed, then we received no response" and add check for
exceptionCallback being null.
also remove faulty PongFilter from PingManager. It never matched any
stanzas, since a Pong is just a plain result IQ that is not qualified by
any XMPP Ping namespace.
Fixes SMACK-597
You can set your custom debugger class as before, by using clear api
method ReflectionDebuggerFactory.setDebuggerClass, or you can set custom
debugger factory using SmackConfiguration.setDebuggerFactory if it's not
enough flexible for your needs
Florian Schmaus
Paul Schaub
damencho
Tomáš Havlas
Vyacheslav Blinov