In order to prevent
<iq to='...' from='...' type='result' id='1'>
<mynode xmlns='my:namespace' myattr='...'>
<somenode\>
</mynode>
</iq>
showing up as UnparsedResultIQ like this:
<iq to='...' from='...' type='result' id='1'>
<somenode\>
</iq>
Also make executorService a non-ScheduledExecutorService. This was an
artifact from times where executorService as used to schedule
Runnables. But now it's just used to queue the receive packets in
Runnables and call the packet collectors and listeners.
- rename idStanzaAcknowledged to stanzaIdAcknowledged
- introduce smWasEnabledAtLeastOnce and throw
StreamManagementNotEnabledExceptions
- enable SM is SM resumption is enabled
Also remove unnecessary done() check in nextStreamElement() and remove
wrong comment in !instantShutdown branch. There is no mechanism to
forcible close the socket.
Those where never correctly implemented and are not really used. If you
want to compare Packets, compare their toXML() result.
N.B. that we keep hashCode/equals for Message.(Subject|Body) because
those are correct and are in-use ('bodies' and 'subjects' are Sets in
Message).
allowing O(1) lookups for PacketExtensions
The one EntityCapsManagerTest becomes obsolete with this change, as
duplicate extension elements (RFC 6120 § 8.4) are now no longer possible
after the stanza has been parsed (they still may be received on the
wire, but only the last duplicate will be added).
sendListeners are now invoked *after* the packet has been put on the
wire.
Also sending listener exceptions are not catched and not only
NotConnectedExceptions. And a exception does not cause a 'break' but a
'continue' now. Log level is WARNING now.
Thanks to Stefan Karlsson for helping with the implementation.
Also add SASLMechanism.checkIfSuccessfulOrThrow(), to increase the
security by verifying the mechanisms state at the end of SASL
authentication.
SASLMechanism now has a SASLPrep StringTransformer.
Refactor SHA1 functions out of StringUtils into SHA1 utility class.
Add MAC utility class.
Make DummyConnection getSentpacket() methods use generics to make unit
testing SCRAM-SHA1 easier.
Fixes SMACK-398
Make sure that the Packets are of type Message. To prevent:
E/AbstractXMPPConnection﹕ Exception in packet listener
java.lang.ClassCastException: org.jivesoftware.smack.packet.Presence cannot be cast to org.jivesoftware.smack.packet.Message
at org.jivesoftware.smackx.muc.MultiUserChatManager$2.processPacket(MultiUserChatM anager.java:124)
at org.jivesoftware.smack.AbstractXMPPConnection.notifiyReceivedListeners(Abstract XMPPConnection.java:854)
at org.jivesoftware.smack.AbstractXMPPConnection$ListenerNotification.run(Abstract XMPPConnection.java:876)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:390)
at java.util.concurrent.FutureTask.run(FutureTask.java:234)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201 (ScheduledThreadPoolExecutor.java:153)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(Schedu ledThreadPoolExecutor.java:267)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1080)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:573)
at java.lang.Thread.run(Thread.java:856)
If a user enabled Smack debug via the property 'smack.debugEnabled', a
ConnectionConfiguration could be created where debuggerEnabled is
'false', because Smack is not yet initialized.
Also make sure that if the property is not set, it won't overwrite
DEBUG_ENABLED = true.
Thanks to William Murphy for providing a detailed issue description and
supposing a fix.
As otherwise there would be multiple log statements (which are of level
fine but nevertheless).
PacketParserUtils: XmlPullParser does not support XML_ROUNDTRIP org.xmlpull.v1.XmlPullParserException: unsupported feature: http://xmlpull.org/v1/doc/features.html#xml-roundtrip (position:START_DOCUMENT null@1:1)
PacketParserUtils: at org.kxml2.io.KXmlParser.setFeature(KXmlParser.java:2091)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:150)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:172)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection.openStream(XMPPTCPConnection.java:963)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketWriter.access$2600(XMPPTCPConnection.java:1224)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketWriter$1.run(XMPPTCPConnection.java:1263)
PacketParserUtils: XmlPullParser does not support XML_ROUNDTRIP org.xmlpull.v1.XmlPullParserException: unsupported feature: http://xmlpull.org/v1/doc/features.html#xml-roundtrip (position:START_DOCUMENT null@1:1)
PacketParserUtils: at org.kxml2.io.KXmlParser.setFeature(KXmlParser.java:2091)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:150)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:172)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection.openStream(XMPPTCPConnection.java:963)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader.access$200(XMPPTCPConnection.java:970)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader$1.run(XMPPTCPConnection.java:989)
PacketParserUtils: XmlPullParser does not support XML_ROUNDTRIP org.xmlpull.v1.XmlPullParserException: unsupported feature: http://xmlpull.org/v1/doc/features.html#xml-roundtrip (position:START_DOCUMENT null@1:1)
PacketParserUtils: at org.kxml2.io.KXmlParser.setFeature(KXmlParser.java:2091)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:150)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:172)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection.openStream(XMPPTCPConnection.java:963)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader.access$200(XMPPTCPConnection.java:970)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader$1.run(XMPPTCPConnection.java:989)
PacketParserUtils: XmlPullParser does not support XML_ROUNDTRIP org.xmlpull.v1.XmlPullParserException: unsupported feature: http://xmlpull.org/v1/doc/features.html#xml-roundtrip (position:START_DOCUMENT null@1:1)
PacketParserUtils: at org.kxml2.io.KXmlParser.setFeature(KXmlParser.java:2091)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:150)
PacketParserUtils: at org.jivesoftware.smack.util.PacketParserUtils.newXmppParser(PacketParserUtils.java:172)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection.openStream(XMPPTCPConnection.java:963)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader.access$200(XMPPTCPConnection.java:970)
PacketParserUtils: at org.jivesoftware.smack.tcp.XMPPTCPConnection$PacketReader$1.run(XMPPTCPConnection.java:989)
I've got reports from users that in some cases there can be multiple
identities. Not just one, and in this case, the node type may not be the
first identity. We now iterate over all identities until we either found
one of type "leaf" or "collection".
For example one user reports an ejabberd with PEP case, where the first
identity is of type "pep", the second of type "leaf" and a third one
with category "account" and type "registered".
Also extend DiscoverInfo API with hasIdentity(String, String) and
getIdentities(String, String).
in AdHocCommandData.
This check was added in 3a37b71e19, but a
session ID can be null, if it's the first invocation. This prevented
RemoteCommand.execute() from executing, since RemoteCommand's sessionID
member will be null at the first invocation.
The approach to avoid XmlPullParser's XML_ROUNDTRIP feature prevents
Smack from handling XML namespaces on e.g. PubSub payloads on platforms
where support for XML_ROUNDTRIP would be available.
We now check for this XmlPullParser feature and use it if it's
available.
apply the Manager pattern to 'muc'. This prevents the user creating
multiple MultiUserChat instances for the same MUC.
Move the static method from MultiUserChat to MultiUserChatManager.
Also add AbstractNodeInformationProvider.
Use CopyOnWriteArraySet for listeners, remove the old reflection based
listener invocation approach.
Remove unnecessary casts.
Return List instead of Collection where possible.
sendMessage(Message) now set's the MUC as 'to' and the message type to
groupchat.
remove PacketMultiplexListener, RoomListenerMultiplexor and
ConnectionDetachedPacketCollector(Test), which was a bunch of
(in same cases redundant) code that formed a complex construct that
presumably tried to make MultiUserChat instances easily garbage
collect-able.
Now, MultiUserChat should be eligible for gc if the userHashLeft() is
invoked before the reference to the instance is dropped, which should be
the case in the most scenarios. Otherwise the connection may references
the MultiUserChat instance over Packet(Listener|Interceptor)s preventing
the gc.
Using
createPacketCollector(filter);
sendPacket(packet);
was error prone, i.e. the PacketCollector could leak if sendPacket()
would throw an exception and the user forgot to call
PacketCollector.cancel(). For cases where
createPacketCollectorAndSend(IQ) is not sufficient (because we don't
send IQs), createPacketCollectorAndSend(PacketFilter, Packet) is now
used, which does take care that the PacketCollector does not leak if
sendPacket() throws an Exception.
Use PresenceListener as intercepting callback interface.
Remove the for-each loops in MultiUserChat by using the interception
facilities of the XMPPConnection.
Add ToFilter.
